HPAC 2.0

HPAC 2.0 is a high-efficiency, inverter-driven, single package, heat pump air conditioner requiring just two-6″ exterior vents. It can even be installed without any construction. The sleek, tightly sealed – zero air leakage, paintable, all-metal cabinet is just 6.5″ deep. It’s whisper-quiet and doesn’t require a condensate drain.

Learn more about HPAC 2.0

HPAC 2.0

HPAC 2.0 is a high-efficiency, inverter-driven, single package, heat pump air conditioner requiring just two-6″ exterior vents. It can even be installed without any construction. The sleek, tightly sealed – zero air leakage, paintable, all-metal cabinet is just 6.5″ deep. It’s whisper-quiet and doesn’t require a condensate drain.

Learn more about HPAC 2.0

VHP 2.0

VHP 2.0  is a single package, ducted, active heat recovery, HEPA fresh air ventilation system combined with a BLDC inverter-driven, heat pump with a 5.3 COP that heats down to -15°F and cools as well. VHP 2.0 mounts inside a closet with no outdoor unit.

Learn more about VHP 2.0

VHP 2.0

VHP 2.0  is a single package, ducted, active heat recovery, HEPA fresh air ventilation system combined with a BLDC inverter-driven, heat pump with a 5.3 COP that heats down to -15°F and cools as well. VHP 2.0 mounts inside a closet with no outdoor unit.

Learn more about VHP 2.0

BEE

BEE is the only device on the market capable of recovering the heat dispersed into the environment from a sanitary system. A patented solution  is based on a very simple idea: to use a heat exchanger crossed by the cold water and heated, inside the recuperator, by the hot water sent to the drain.

Clean water is preheated by drawing heat from the drain water and water with a higher temperature enters the mixer or water heater. Even in terms of maintenance, BEE does not require any typical plumbing drains.

Learn more about BEE

BEE

BEE is the only device on the market capable of recovering the heat dispersed into the environment from a sanitary system. A patented solution  is based on a very simple idea: to use a heat exchanger crossed by the cold water and heated, inside the recuperator, by the hot water sent to the drain.

Clean water is preheated by drawing heat from the drain water and water with a higher temperature enters the mixer or water heater. Even in terms of maintenance, BEE does not require any typical plumbing drains.

Learn more about BEE